Repair guide for Peugeot 607 Power Steering Pump Issues

Repair guide for Peugeot 607 Power Steering Pump Issues

Repair guide for Peugeot 607 Power Steering Pump Issues


Table Of Contents


Problem Description

The Peugeot 607, despite its exemplary performance, may sometimes have power steering pump issues. These problems can make steering the vehicle more difficult and unsafe. This guide will help you diagnose and fix the power steering pump issue.


Required Tools


Step-by-Step Repair Guide

Step 1: Locate the Power Steering Pump

The power steering pump is located on the front of the engine, towards the passenger side. Consulting the vehicle's manual can be beneficial.

Step 2: Remove the Serpentine Belt

Identify the tensioner pulley and adjust it to slacken the serpentine belt. Once slack, remove the belt from the power steering pump.

Step 3: Drain the Power Steering Fluid

Position the pan under the power steering pump. Unscrew the lower hose of the pump to release the fluid, allowing it to be draining into the pan.

Step 4: Remove the Power Steering Pump

With the fluid drained, unscrew the power steering pump. This will involve unscrewing the mounting bolts attaching it to the engine and removing any remaining hoses.

Step 5: Install the New Power Steering Pump

Position the new pump and screw it in place. Attach the serpentine belt and any hoses previously removed. Fill the pump with power steering fluid.

Step 6: Test the Installation

Start the engine and test your steering for improved performance. Check for any leaks and adjust accordingly.

That's it! Now you should have successfully replaced your power steering pump for your Peugeot 607. Happy driving!