How to Change a Flat Tire on a Ford Mustang

How to Change a Flat Tire on a Ford Mustang

How to Change a Flat Tire on a Ford Mustang

If you've discovered a flat tire on your Ford Mustang, don't worry! You can change the flat tire on your own with a few essential tools. This guide will walk you through the process step-by-step.

Tools You'll Need:

Steps to change the flat tire:

  1. Safe Spot:

    Find a safe spot away from traffic. Make sure that the ground is level and firm. Turn on your hazard lights and apply the parking brake.

  2. Loosen the Lug Nuts:

    Use the lug wrench to loosen the lug nuts. Don't remove the lug nuts yet.

  3. Use the Jack:

    Place the jack in the correct spot under the vehicle. If you're not sure, check the owner's manual. Jack up the car until the flat tire is off the ground.

  4. Remove the Flat:

    Remove the lug nuts and then slide the flat tire off by pulling it towards you. Set it aside in a safe place.

  5. Mount the Spare:

    Place the spare on the hub, align the rim with the lug bolts, then push the spare onto the car. Tighten the lug nuts by hand as much as you can.

  6. Lower the Vehicle:

    Lower the vehicle with the jack until it’s just clear of the ground. Tighten the lug nuts with the wrench. Lower the vehicle completely.

  7. Check the Tire Pressure:

    Make sure the spare tire has enough pressure. You can then place the flat tire and tools back in the trunk. Remember to get your flat tire fixed as soon as possible.

That's it! By following these steps, you can easily change a flat tire on your Ford Mustang.